Starting an automatic car is relatively simple when compared to a manual car. With a few basic steps, any driver can start their vehicle with ease. Automatic cars are very user-friendly and require minimal input from the driver to get started, making them an ideal choice for those who prefer hassle-free driving.
Here’s everything you need to know about starting an automatic car:
Step 1: Check your surroundings
Before starting your engine, always ensure that you check your surroundings. Make sure that you’re in a safe location where there is no traffic or pedestrians around. It is best practice to put on your seatbelt before starting the engine as well.
If necessary, adjust the driver’s seat and steering wheel position so that you feel comfortable and can operate all of the controls easily. Always double-check that the gear shift lever (known as the selector ) is set correctly before attempting to move off – this will ensure safety during startup.
Step 2: Confirm Parking Mode
The next step involves confirming whether or not parking mode has been engaged. This means ensuring that the gearbox selector mechanism has been shifted fully into “P” (parking) mode which locks up all four wheels – preventing unintended movement while stationary.
To engage parking mode:
1) Press down on your brake pedal with your right foot
2) Push down on button located below “P”
3) Shift lever all way upwards into “Park”.
It’s important not to skip this step since it ensures maximum safety when putting power through an automatic transmission system – never attempt this process without checking “p” first!
Step 3: Start The Engine
After placing the gear shift lever in ‘Park’ position , turn the key within ignition switch by either turning it/pressing push-start button depending on model type until dashboard lights come alive indicating successful startup – You might also hear slight whirring sound due date re-circulate fuel line pressure build-up ready valve-timing adjustment.
Step 4: Depress Brakes
You cannot simply move the vehicle after starting it without first depressing the brake pedal. This is a safety measure that prevents unintended movement, keeping both you and your vehicle safe while on the road.
When in P (park), there will be no power being transferred to wheels – as this is where most automatic cars are set by default when parked . To enable driving mode , foot sould stillbe allowed to rest on break pedle firmly until selection of gear lever technique described ahead, has been completed..
Step 5: Release Handbrake
Release handbrake using either button or old-style manual release switch/puller depending upon model of car immedately following startup process.
Some cars may require this as an extra step to engage gears during startup since they sense tension when applied which could interfere with software on selector mechanism controlling hydraulic pump’s pressure – though not necessary for generally healthy functioning vehicles most times.
If your car however happens not come with handbrake feature then put foot down hard braking pedal even harder instead!
Step 6: Shift up Gears
Once all of these steps have been followed, it’s now time to shift up gears carefully so as not to accidentally stall/overheat engine , or cause damage some internal machinery system :
Gear
Position
Description
P Parking : Locks transmission mechanism fully
N Neutral : Free-wheels/Pendulums-in-transit state thus Gear shaft does n’ flow motion.
D Drive : enables forward momentum via low-gear ratios for acceleration
L Low Gain control enabling higher speeds achieved through multiple forward lower-ratio limits
Next turn shift knob towards “Drive” position slowly but steadily whilst holding onto brake paddle in beginning because initial drive torque can suddenly surge forward quite fast – if left unchecked would quickly prove dangerous especially within limited driver experience .
Please remember:
– If changing into any other gear, operate brake pedal within the whole process to prevent any unwanted movements from happening at all times.
– Always follow guidelines issued by your car’s manufacturer with regards to its operating instructions and Warning indicators which are made available around dashboard area
Step 7: Move Off
Once you can feel that the automatic transmission has engaged gears in drive , slowly releasing ramped pressure on footbrake while easing down on accelerator simultaneously – This will result in increasing forward propulsion until desired speed whilst keeping control steadiness as especially lower gears kick in.
Conclusion
Starting an automatic car is a fairly simple process requiring only a few basic steps —confirming parking mode (P), starting engine, depressing brakes, and shifting up gears carefully. It’s important always adhere safety precautions protocols applicable for each specific make/model/type of vehicle since differences could exist based upon engineering specifics.
Overall though when paying attention to above details anyone can easily enjoy smooth automatic driving experience feel comfortable utilizing controls along the roadways!