As dance enthusiasts, we all love the idea of dancing under an open sky. However, dancing on grass can be a bit difficult due to uneven surface and mud or dirt getting stuck in your shoes. If you’re planning a wedding, garden party or any other such event that requires a dance floor on grass, don’t worry as here’s how you can build one.
To begin with, it is important to find a slightly elevated spot where the ground is more even. Check for rocks or roots that might cause tripping hazards as this may prove dangerous during the event.
Next comes measuring your space and deciding what size of dance floor would be perfect for own specific area. You obviously do not want it to take away too much space from your guests sitting area hence decide wisely based on seating arrangements planned out beforehand.
Now comes setting up ‘the base’. Here are different methods:
1) Using Plywood
a) Measure the dimensions of the area and get enough ¾ inch thick plywood sheets needed.
b) Remove any stones/rocks/bumps if present
c) Place the wood pieces down onto the cleared surface while making sure they sit flush against each other (you could ask someone else to hold them steady while you screw them together).
d) Nail all corners together.
e.) Now place 2” x 4″ stakes at approximately three feet intervals around perimeter of square so that they protrude above top planks by about few inches or so. The stakes will need have legs cut off at approx four footlength – these will serve as supporting structure when adding lattice sections later
2) Using grid system
This method involves creating some kind of grid system made from either wooden beams or PVC pipes topped with gridded foam mats (these resemble jigsaw pieces interlocking). Then lay artificial turf over matting – this provides good cushioning underneath dancers’ feet whilst giving appearance indeed flooring installed rather than mere makeshift design.
3) Using SnapLock Dance Floors
Another option is using snap-together dance floors. These come in different sizes, patterns, materials and colors so you can choose one that best suits your event’s theme or style. They are made from either plastic or vinyl sheets with locking tabs along the edges and eliminate the need for nails on a wooden base.
Once your ‘base’ is set up it is now time to cover it for safety measures:
a.) Make sure flooring material used does not have uneven joints as this could create tripping hazards.
b) Covering materials should be available locally instead of ordering them online since they need to fit dimensions customised by users beforehand.
c) Consider grass protection whilst installing the floor as you don’t want attendees coming in heels sinking through sod causing downsides such as Ruining existing ground arrangements etc… There are mats available with holes to allow water and air flow below surface whilst keeping turf protected https://www.greatmats.com/portable-floor/portable-dance-floor-kit.php
The pathway leading to dance area should also have levelled walkway constructed – no stairways unless absolutely necessary!
With these tips, you’re ready to build a high-quality dance floor on grass!
As dance enthusiasts, there is nothing quite like the idea of dancing under an open sky. It’s an incredibly romantic and exciting notion to be able to move freely without confinement in the great outdoors. However, dancing on grass can present many challenges; it can be difficult due to uneven surfaces and mud or dirt getting stuck in your shoes. If you’re planning a wedding, garden party or any other such event that requires a dance floor on grass, don’t worry as here’s how you can build one.
The first step is crucial when building a dance floor on grass: find a slightly elevated spot where the ground is more even. Check for rocks or roots that might cause tripping hazards as this could prove harmful during your event.
Next comes measuring your space and deciding what size of dance floor would be perfect for your specific area. You obviously do not want it taking up too much space from your guests’ sitting area hence decide wisely based on seating arrangements planned out beforehand.
Now it’s time to set up ‘the base’. There are different methods:
1) Using Plywood
Using plywood sheets is probably the most common way of creating a base for outdoor dancing events:
a) Measure the dimensions of the area and get enough ¾ inch thick plywood sheets needed.
b) Clear away any stones/rocks/bumps if present.
c) Place the wood pieces down onto the cleared surface while making sure they sit flush against each other (you could ask someone else to hold them steady while you screw them together).
d) Nail all corners together.
e.) Now place 2” x 4″ stakes at approximately three feet intervals around perimeter of square so that they protrude above top planks by about few inches or so. The stakes will need have legs cut off at approx four footlength – these will serve as supporting structure when adding lattice sections later
2) Using grid system
This method involves creating some kind of grid system made from either wooden beams or PVC pipes topped with gridded foam mats. Then lay artificial turf over matting – this provides good cushioning underneath dancers’ feet whilst giving the appearance that flooring has been installed rather than a makeshift design.
3) Using SnapLock Dance Floors
The third option is to use snap-together dance floors. These come in different sizes, patterns, materials and colours so you can choose one that best suits your event’s theme or style. They are made from either plastic or vinyl sheets with locking tabs along the edges and eliminate the need for nails on a wooden base.
Once your ‘base’ is set up, it’s now time to cover it:
a.) Make sure the covering material used does not have uneven joints as this could create tripping hazards.
b) Covering materials should be available locally instead of ordering them online since they need to fit dimensions customised by users beforehand.
c) Consider grass protection whilst installing the floor as you don’t want attendees coming in heels sinking through sod causing downsides such as ruining existing ground arrangements etc… There are mats available with holes to allow water and air flow below surface whilst keeping turf protected https://www.greatmats.com/portable-floor/portable-dance-floor-kit.php
The pathway leading to the dance area should also have levelled walkway constructed – no stairways unless absolutely necessary!
In summary, building an outdoor dance floor can be done relatively easily once you know how. Find an even spot first off before measuring out what size dancefloor would work best for your space. Next comes setting up ‘the base’, which can be done using one of three main methods: plywood sheets, grid systems or snap-lock floors.Depending on your budget and needs, any of these options will work well provided they are laid correctly.In addition, consider covering/passaging surfaces surrounding / approaching dancing place — finally adding chosen floor coverings.